J (0 to 400 ˚C) or K (0 to 1200 ˚C) or R (0 to 1600 ˚C)
J (0 to 400 ˚C) or K (0 to 1200 ˚C)
RTD
PT100 2W/3W (0 to 400 ˚C or 0 to 199.9 ˚C or
PT100 2W/3W (0 to 400 ˚C or 0 to 199.9 ˚C)
-50.0 to 199.9 ˚C)
Control Output
Relay*
230V AC, 5A (1C/O or 2C/O)
SSR
24V DC ±2V
BUZZER
24V DC ±2V
Resolution
1 ˚C (0.1 ˚C for range less than 200 ˚C)
Accuracy
±1% of FSD
Set Point
1 set point
Relay Action
HEAT MODE or COOL MODE (Factory Set)
Power Supply
110/230V AC ± 20%, 50 Hz, 24V AC/ DC
Indication
LED To Indicate Relay Status & Sensor Break
Protection
Relay Turns Off In Case of Sensor Break
Installation
The RTD sensor should be connected to the instrument by cables of proper gauge to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.
Cut Out (Mm)
92 X 92
68 X 68
44 X 92
Mounting
Flush Panel Mounting with side clamps fixed behind the panel
Digital Temperature Indicator Fix Range
MODEL
DTI-111
DTI-211
Dimensions
96X96X100
72X72X85
(HXWXD)mm
Display
RED,3½ DIGITS, 0.56"
Range
3½ Digits ( 0-100 or 0-200 or 0-1000 or 0-1500 or 0-199.9 )
(Factory Set) Correspond to Input
INPUT
Current
0 - 20 mA, 4 - 20 mA
Voltage
0 -10V DC
Power Supply
110/230V AC ± 20%, 50 Hz, 24V AC/DC
Cut Out (mm)
92 X 92
68 X 68
Mounting
Flush Panel Mounting with side clamps fixed behind the panel